Actions:
- Cleaning of the panels from detritus and guano
- Inspection and servicing of the solar unit (including the control unit, pipe insulation and the condition of the antifreeze fluid), ensuring that the system is running efficiently.
- Inspection and servicing of the hot water cylinder.
- Benchmark log books updated.
- Inspecting the panels and solar unit for damage.
- Consulting the MCS installation guide to determine signage requirements to ensure compliance.
- Inspection for error codes and faults within the system and advise any remedial actions.
- Inspection of PV modules for defects such as burn marks, discolouration, delamination or broken glass.
- Checking modules for excessive dirt build-up and advising any remedial actions.
- Checking that module wiring is secure and not resting on the roof, hanging loose or exposed to potential damage.
- Confirming the module is not bent to an unapproved radius.
- Inspecting module mounting system for defects including rust, corrosion, sagging and missing. or broken clips and bolts and advising any remedial actions.
- In roof-mounted systems, check for the integrity of the penetrations.
 

Visual Inspection:
- Confirming that roof penetrations are watertight, if applicable.
- Confirming that the roof drainage is adequate, roof drains are not clogged and confirm that there are no signs of water pooling in the vicinity of the array.
- Checking for vegetation growth or other new shade items such as a satellite dish and advising any remedial actions.
- Checking for ground erosion near the footings of a ground mount system.
- Confirm proper system signage is in place.
- Confirm appropriate expansion joints are used where needed in long conduit runs.
- Checking for any loose hanging wires.
 

Benefits:
- Monthly Payment Plan Available.
- 24hr telephone support RevCare support Line.
- Guaranteed rapid engineer response.
- 1 free breakdown call-out and repair including Labour (excludes Parts).